Why do baitcaster backlash

When you feel that you are getting the hang of it, you can try investing in a more advanced bait caster. The most important: practice more, then you will handle it like a pro! Reels Casting Spinning Spincast Reels. Ice Fishing Ice Fishing Equipment. How to Prevent Backlash on a Baitcaster? How to prevent backlash on your casting reel? Do not cast your lure against the wind Casting against the wind will slow down your lure, but not your reel, resulting in backlash.

Follow Us. Subscribe now and get special offers Subscribe. Become accustomed to the braking system and train yourself with your thumb to command the line with every cast.

Being in control of your rod and reel can be one of the strongest defenses against backlash. Backlashes can present annoyances to any fisherman, young or old. Use these angling Pro Tips to spend more time pulling monsters from the deep than pulling loops from the reel this fishing season.

Skip to content. Simply put, if you are casting directly into strong winds, it will push the line and lure back towards you, thus causing the fishing line to be loose instead of tight. Just try not to cast into the wind as much as possible.

As you will see down below, there are other issues which can cause backlash, but they are all pretty much irrelevant if you are casting into the wind.

As we touched on above, if the line and lure is not heavy enough, you will probably suffer from backlash when using a baitcaster. This does also have to do with spool tension and the brake system.

You need to have the right weight of fishing line and lure weight, in combination with the proper tension and brake system settings to prevent backlash. You need the lure to be quite heavy if you want the line to stay taught as you cast, and the heavier the line is, the heavier the lure needs to be by comparison. Yes, using a slightly heavier fishing line can also help. The heavier the line is, the less it will be affected by the wind and other environmental factors.

However, keep in mind that if you are using a heavy line, the lure needs to be comparably heavier yet. The lure needs to have enough weight to it to pull the line tight and keep it that way for the duration of the casting flight. At the end of it all, to fix backlash, you might just need a heavier lure.

On a side note, it can also depend on the type of fishing line you are using. If you are suffering from lots of backlash, you want to switch to monofilament line, if you are not using that already here is how much you should put on your reel. Both fluorocarbon and braided lines tend to suffer from increased backlash when compared to monofilament line. Now, the weight of the fishing line and the lure does make a big difference, as does the spool tension and brake system, plus they work together as well.

Both of these factors come together. Speaking of the brake system and spool tension, if the brake system is not set high enough, and the spool tension is too low, the line will fly off the spool way too fast in comparison to how fast the lure and front of the line can fly through the air. So, if you are suffering from backlash with your baitcaster, tightening up the spool and increasing the level of brake might do the trick.

This will slow down the speed at which the line comes off the spool, therefor helping to keep it tight. Yes, this does also relate to the weight of the lure. If you have the tension and brake set low, you need to have an increasing heavy lure. A heavier lure will generate enough momentum and velocity to keep the line tight, even if it does come off the spool quickly.